Copilot Tech Specs

Materials:
- Pistol-grip style plastic enclosure with textured palm grip
- Large 13mm red and blue LED backlit tactile pushbuttons
- Protective display bezel and sun shield
- Adjustable 10mm nylon hand-strap
- Weighs approximately 155 grams
Dimensions:
- Length 154mm
- Grip width 23mm
- Lever range 25mm
- Throttle range 18mm
Display:
- 1.5" 128x128 pixel 16-bit RGB OLED
Processor:
- nRF52840 SoC with Bluetooth 5
- 64MHz ARM Cortex-M4F
Sensors and Communications:
- 3-axis Gyroscope
- 3-axis Accelerometer
- 3-axis Magnetometer
- Precision barometric altimeter
- Temperature sensor
- Bluetooth Low Energy receiver
- Dual-band GPS receiver (Copilot Standard)
- 1090MHz ADS-B receiver (Copilot Professional)
LED Strobe:
- Available for the Copilot Professional and Bluetooth Wireless Connection Kit
- 1000 Lumen maximum brightness at 9 Watts
- Adjustable intensity and frequency (40 to 100 pulse/min)
Internal Battery:
- 1.5 Watt-hour Lithium Ion Polymer
- 2 hours (Copilot Standard - LED Strobe OFF)
- 1.5 hours (Copilot Professional + LED Strobe LOW)
- 1.0 hours (Copilot Professional + LED Strobe HIGH)
- External power via micro-USB or 8-pin GX-16 aviation connector
Software Features:
- Navigation Summary (up to 6 measurements from 14 available options)
- Navigation Map with Intelligent Flight Director (Copilot Standard)
- Virtual Radar with Collision Avoidance (Copilot Professional)
- Optimized graphics processing to eliminate display flicker
- Up to 100 waypoints per file (GPX or KML format)
- Advanced onboard sensor calibration
- Configurable Electronic Circuit Breaker
- Configurable low voltage alarm
- 40+ additional field-configurable options
- Simulation mode for paramotors
- Open-source code available for the Arduino IDE
Supported Waypoint Formats:
- GPX waypoint
- KML placemark
Data Logging:
- Up to 10Hz logging frequency
- GPX latitude, longitude and altitude
- KML latitude, longitude and altitude
- CSV custom data format
Compatible External Sensors:
- Copilot Connection Kit for battery voltage up to 24S Li-Po
- Allegro ACS758 series hall-effect based linear current sensors
- Pulse-based tachometers or digital RPM feedback
- Pulse-based flow meters